Build, Deploy and Validate Cassini Image

The recommended approach for image build setup and customization is to use the kas build tool. To support this, Cassini provides configuration files to setup and build different target images, different distribution image features, and set associated parameter configurations.

This page first briefly describes below the kas configuration files provided with Cassini, before guidance is given on using those kas configuration files to set up the Cassini distribution on a target platform.

Note

All command examples on this page can be copied by clicking the copy button. Any console prompts at the start of each line, comments, or empty lines will be automatically excluded from the copied text.

The kas directory contains kas configuration files to support building and customizing Cassini distribution images via kas. These kas configuration files contain default parameter settings for a Cassini distribution build. Here, the files are briefly introduced, classified by type:

• Base Configs: Configures common software components

  • cassini.yml to build an image for the Cassini distribution.

• Build Cloud Configs: Set and configure container runtime and cloud service

  • no-cloud.yml to include the default container runtime without a cloud service.

  • greengrass.yml to include Docker and the AWS IoT Greengrass V2 cloud service.

  If no cloud config is specified, Docker and K3s orchestration is included by default

• Build Modifier Configs: Set and configure features of the Cassini distribution

  • dev.yml to configure the image for development using debug tweaks and disable Security Hardening.

  • tests.yml to include run-time validation tests into the image with debug tweaks.

• Target Platform Configs: Set the target platform

  For information on supported targets in Cassini and corresponding value for MACHINE variable, refer to Target Platforms.

These kas configuration files can be used to build a custom Cassini distribution by passing the Base Config and one Target Platform Config to the kas build tool. Build Cloud Configs and Build Modifier Configs are optional (only one of each can be included). Configuration files are separated with a colon in the kas execution command line, see examples below:

kas build <Base Config>:<Build Cloud Configs>:<Build Modifier Configs>:<Target Platform Config>

In the next section, guidance is provided for configuring, building and deploying Cassini distributions using these kas configuration files.

Build Host Environment Setup

This documentation assumes an Ubuntu based build host, where the build steps have been validated on the Ubuntu 20.04 LTS (Focal Fossa) and 22.04 LTS (Jammy Jellyfish).

A number of package dependencies must be installed on the Build Host to run build scenarios via the Yocto Project. The Yocto Project documentation provides the list of essential packages together with a command for their installation.

The recommended approach for building Cassini is to use the kas build tool. To install kas:

python3 -m pip install kas==4.3.2

For more details on kas installation, see kas Dependencies & installation.

To deploy a Cassini distribution image onto the supported target platform, bmap-tools is used. This can be installed via:

sudo apt install bmap-tools

Note

The Build Host should have at least 65 GBytes of free disk space to build a Cassini distribution image.

Download

The meta-cassini repository can be downloaded using Git, via:

# Change the tag or branch to be fetched by replacing the value supplied to
# the --branch parameter option

git clone https://gitlab.com/Linaro/cassini/meta-cassini.git --branch styhead-dev
cd meta-cassini

Build and Deploy

Refer to the platform guides instructions on how to build and deploy the Cassini images on supported platforms:

• Getting Started with Arm Corstone-1000 for MPS3

• Getting Started with Arm Corstone-1000 FVP

• Getting Started with KV260

• Getting Started with Generic Arm64 Images

Run

To run the deployed Cassini distribution image, simply boot the target platform.

The Cassini distribution image can be logged into as cassini user.

The distribution can then be used for deployment and orchestration of application workloads in order to achieve the desired use-cases.

Validate

As an initial validation step, check that the appropriate Systemd services are running successfully,

• docker.service

• k3s.service is available unless a cloud modifier is included as part of the build config.

• greengrass.service is available if greengrass.yml is included as part of the build config.

A service can be checked by running the command:

systemctl status --no-pager --lines=0 <systemd.service>

And ensuring the command output lists them as active and running.

More thorough run-time validation of Cassini components are provided as a series of integration tests, available if the kas/tests.yml kas configuration file was included in the image build.

Note

Due to performance limitations, K3s is not currently supported on the Arm Corstone-1000.

Reproducing the Cassini Use-Cases

This section briefly demonstrates simplified use-case examples, where detailed instructions for developing, deploying, and orchestrating application workloads are left to the external documentation of the relevant technology.

Deploying Application Workloads via Docker and K3s

This example deploys the Nginx web server as an application workload, using the nginx container image available from Docker’s default image repository. The deployment can be achieved either via Docker or via K3s, as follows:

1. Boot the image and log-in as cassini user.

2. Ensure the target device can access the internet

   wget www.linaro.org
   

   The output should be similar to:

   --2023-12-02 12:42:10--  http://www.linaro.org/
   Resolving www.linaro.org... 18.165.227.69, 18.165.227.126, 18.165.227.43, ...
   Connecting to www.linaro.org|18.165.227.69|:80... connected.
   HTTP request sent, awaiting response... 301 Moved Permanently
   Location: https://www.linaro.org/ [following]
   --2023-12-02 12:42:10--  https://www.linaro.org/
   Connecting to www.linaro.org|18.165.227.69|:443... connected.
   HTTP request sent, awaiting response... 200 OK
   Length: 54811 (54K) [text/html]
   Saving to: 'index.html.1'
   
   index.html    100%[===============>]  53.53K   323KB/s    in 0.2s
   
   2023-12-02 12:42:26 (323 KB/s) - 'index.html' saved [54811/54811]
   

3. Deploy the example application workload:

   • Deploy via Docker

     3.1. Run the following example command to deploy via Docker:

     sudo docker run -p 8082:80 -d nginx
     

     3.2. Confirm the Docker container is running by checking its STATUS in the container list:

     sudo docker container list
     

   • Deploy via K3s

     3.1. Run the following example command to deploy via K3s:

     cat << EOT > nginx-example.yml && sudo kubectl apply -f nginx-example.yml
     apiVersion: v1
     kind: Pod
     metadata:
       name: k3s-nginx-example
     spec:
       containers:
       - name: nginx
         image: nginx
         ports:
         - containerPort: 80
           hostPort: 8082
     EOT
     

     3.2. Confirm that the K3s Pod hosting the container is running by checking that its STATUS is running, using:

     sudo kubectl get pods -o wide
     

4. After the Nginx application workload has been successfully deployed, it can be interacted with on the network, via for example:

   wget localhost:8082
   

Note

As both methods deploy a web server listening on port 8082, the two methods cannot be run simultaneously and one deployment must be stopped before the other can start.

Note

Due to performance limitations, K3s is not currently supported on the Arm Corstone-1000.